Add files via upload

templates/command_templates/huawei/interface_config.py

@@ -0,0 +1,136 @@
+"""
+华为设备接口配置模板
+支持配置接口IP、状态、带宽、描述等操作
+"""
+
+def configure_interface_ip(interface: str, ip_address: str, subnet_mask: str) -> str:
+    """
+    配置接口IP地址
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/0/1
+        ip_address: IP地址
+        subnet_mask: 子网掩码
+    
+    Returns:
+        配置命令字符串
+    """
+    commands = [
+        "system-view",
+        f"interface {interface}",
+        f"ip address {ip_address} {subnet_mask}",
+        "undo shutdown",
+        "quit"
+    ]
+    return "\n".join(commands)
+
+def configure_interface_state(interface: str, state: str = "up") -> str:
+    """
+    配置接口状态
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/0/1
+        state: 接口状态，up或down
+    
+    Returns:
+        配置命令字符串
+    """
+    commands = [
+        "system-view",
+        f"interface {interface}"
+    ]
+    
+    if state.lower() == "up":
+        commands.append("undo shutdown")
+    elif state.lower() == "down":
+        commands.append("shutdown")
+        
+    commands.append("quit")
+    return "\n".join(commands)
+
+def configure_interface_description(interface: str, description: str) -> str:
+    """
+    配置接口描述
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/0/1
+        description: 接口描述
+    
+    Returns:
+        配置命令字符串
+    """
+    commands = [
+        "system-view",
+        f"interface {interface}",
+        f"description {description}",
+        "quit"
+    ]
+    return "\n".join(commands)
+
+def configure_interface_speed(interface: str, speed: str) -> str:
+    """
+    配置接口速率
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/0/1
+        speed: 速率，如10, 100, 1000, auto
+    
+    Returns:
+        配置命令字符串
+    """
+    commands = [
+        "system-view",
+        f"interface {interface}",
+        f"speed {speed}",
+        "quit"
+    ]
+    return "\n".join(commands)
+
+def configure_interface_duplex(interface: str, duplex: str) -> str:
+    """
+    配置接口双工模式
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/0/1
+        duplex: 双工模式，full, half, auto
+    
+    Returns:
+        配置命令字符串
+    """
+    commands = [
+        "system-view",
+        f"interface {interface}",
+        f"duplex {duplex}",
+        "quit"
+    ]
+    return "\n".join(commands)
+
+def show_interface(interface: str = None) -> str:
+    """
+    显示接口信息
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/0/1，为None时显示所有接口
+    
+    Returns:
+        显示命令字符串
+    """
+    if interface:
+        return f"display interface {interface}"
+    else:
+        return "display interface brief"
+
+def show_ip_interface(interface: str = None) -> str:
+    """
+    显示接口IP信息
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/0/1，为None时显示所有接口
+    
+    Returns:
+        显示命令字符串
+    """
+    if interface:
+        return f"display ip interface {interface}"
+    else:
+        return "display ip interface brief"