Add files via upload

templates/command_templates/cisco/interface_config.py

@@ -0,0 +1,121 @@
+"""
+思科设备接口配置模板
+支持配置接口IP、状态、带宽、描述等操作
+"""
+
+def configure_interface_ip(interface: str, ip_address: str, subnet_mask: str) -> str:
+    """
+    配置接口IP地址
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/1
+        ip_address: IP地址
+        subnet_mask: 子网掩码
+    
+    Returns:
+        配置命令字符串
+    """
+    commands = [
+        "configure terminal",
+        f"interface {interface}",
+        f"ip address {ip_address} {subnet_mask}",
+        "no shutdown",
+        "exit",
+        "end"
+    ]
+    return "\n".join(commands)
+
+def configure_interface_state(interface: str, state: str = "up") -> str:
+    """
+    配置接口状态
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/1
+        state: 接口状态，up或down
+    
+    Returns:
+        配置命令字符串
+    """
+    commands = [
+        "configure terminal",
+        f"interface {interface}"
+    ]
+    
+    if state.lower() == "up":
+        commands.append("no shutdown")
+    elif state.lower() == "down":
+        commands.append("shutdown")
+        
+    commands.append("exit")
+    commands.append("end")
+    return "\n".join(commands)
+
+def configure_interface_description(interface: str, description: str) -> str:
+    """
+    配置接口描述
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/1
+        description: 接口描述
+    
+    Returns:
+        配置命令字符串
+    """
+    commands = [
+        "configure terminal",
+        f"interface {interface}",
+        f"description {description}",
+        "exit",
+        "end"
+    ]
+    return "\n".join(commands)
+
+def configure_interface_bandwidth(interface: str, bandwidth: str) -> str:
+    """
+    配置接口带宽
+    
+    Args:
+        interface: 接口名称，如 GigabitEthernet0/1
+        bandwidth: 带宽，单位kbps
+    
+    Returns:
+        配置命令字符串
+    """
+    commands = [
+        "configure terminal",
+        f"interface {interface}",
+        f"bandwidth {bandwidth}",
+        "exit",
+        "end"
+    ]
+    return "\n".join(commands)
+
+def show_interface(interface: str = None) -> str:
+    """
+    显示接口信息
+    
+    Args:
+        interface: 接口名称，如GigabitEthernet0/1，为None时显示所有接口
+    
+    Returns:
+        显示命令字符串
+    """
+    if interface:
+        return f"show interface {interface}"
+    else:
+        return "show interface"
+
+def show_ip_interface(interface: str = None) -> str:
+    """
+    显示接口IP信息
+    
+    Args:
+        interface: 接口名称，如GigabitEthernet0/1，为None时显示所有接口
+    
+    Returns:
+        显示命令字符串
+    """
+    if interface:
+        return f"show ip interface {interface}"
+    else:
+        return "show ip interface brief"